Extra of road lights with led lamps for low battery draining...also 12v socket . All cables are inside hot air shrink tubes. All the electrics are on the tray under seat. The live for the relays take it from the drive light and the yellow cable, use the air vent to drive the cable in and connect with the yellow. You need two relays, one for the 12v socket and one for the fog lights! The two relays going under the tray, there is enough space for them. Above the tray is that gray box for the fuses. You need one fuse for the relays, one for the socket, one for the upper fog lights and one for the bottom ones! Also you need a general fuse for all of this! You have to really careful because BMW have the can-bus system and if that system search anything then BMW electronics will cut off the power everywhere!!! Also can damage really expensive electronic equipment !!! I did this job on my own as I am qualified electrician. All the cables must to pass from left hand side under the fuel tang using cable ties and use the same way as BMW factory did! the lights is from HELLA MICRO DE. the lights swich i use is the one from bmw for fog lights, so i have two of those on the bike now. Good luck :)
http://www.allelectrician.com
No comments:
Post a Comment