A guide to building a can beta engine. Part 2 is here : www.youtube.com Templates are here : sites.google.com Materials needed : 1 x M6 x 15 Machine screw (not stainless) 2 x M6 x 20 Washers 1 x M6 nut 1 x Balloon (I used a wedding balloon) 1 x 300mm piece of 1mm wire (for the con rod) 1 x 200mm piece of 1.6mm wire (for the cranks) 1 x Roll of Steel wire wool 1 x 200mm piece of 0.45mm fishing line 5 x Electrical Screw blocks / terminal blocks/ choc blocks 1 x Epoxy resin 1 x tuna tin 2 x Drinks cans (Steel works better)
http://www.allelectrician.com
No comments:
Post a Comment